Rent 9781111576004 | Steel Design | Segui, William T. @knetbooks.com

Summary Table of Contents

STEEL DESIGN covers the fundamentals of structural steel design with an emphasis on the design of members and their connections, rather than the integrated design of buildings. The book is designed so that instructors can easily teach LRFD, ASD, or both, time-permitting. The application of fundamental principles is encouraged for design procedures as well as for practical design, but a theoretical approach is also provided to enhance student development. While the book is intended for junior-and senior-level engineering students, some of the later chapters can be used in graduate courses and practicing engineers will find this text to be an essential reference tool for reviewing current practices.

About the Author	p. v
Preface	p. xi
Introduction	p. 3
Structural Design	p. 3
Loads	p. 6
Building Codes	p. 7
Design Specifications	p. 7
Structural Steel	p. 8
Standard Cross-Sectional Shapes	p. 12
Problems	p. 17
Concepts in Structural Steel Design	p. 21
Design P... MOREhilosophies	p. 21
American Institute of Steel Construction Specification	p. 23
Load Factors, Resistance Factors, and Load Combinations for LRFD	p. 24
Safety Factors and Load Combinations for ASD	p. 26
Probabilistic Basis of Load and Resistance Factors	p. 30
Steel Construction Manual	p. 34
Design Computations and Precision	p. 36
Problems	p. 38
Tension Members	p. 41
Introduction	p. 41
Tensile Strength	p. 42
Effective Area	p. 50
Staggered Fasteners	p. 57
Block Shear	p. 64
Design of Tension Members	p. 67
Threaded Rods and Cables	p. 76
Tension Members in Roof Trusses	p. 79
Pin-Connected Members	p. 88
Problems	p. 90
Compression Members	p. 109
Introduction	p. 109
Column Theory	p. 110
AISC Requirements	p. 117
Local Stability	p. 121
Tables for Compression Members	p. 130
Design	p. 132
More on Effective Length	p. 138
Torsional and Flexural-Torsional Buckling	p. 155
Built-Up Members	p. 162
Problems	p. 171
Beams	p. 189
Introduction	p. 189
Bending Stress and the Plastic Moment	p. 190
Stability	p. 196
Classification of Shapes	p. 198
Bending Strength of Compact Shapes	p. 199
Bending Strength of Noncompact Shapes	p. 211
Summary of Moment Strength	p. 215
Shear Strength	p. 216
Deflection	p. 224
Design	p. 226
Floor and Roof Framing Systems	p. 239
Holes in Beams	p. 245
Open-Web Steel Joists	p. 248
Beam Bearing Plates and Column Base Plates	p. 251
Biaxial Bending	p. 265
Bending Strength of Various Shapes	p. 276
Problems	p. 281
Beam-Columns	p. 299
Definition	p. 299
Interaction Formulas	p. 300
Methods of Analysis for Required Strength	p. 305
The Moment Amplification Method	p. 307
Braced versus Unbraced Frames	p. 310
Members in Braced Frames	p. 311
Members in Unbraced Frames	p. 327
Design of Beam-Columns	p. 339
Trusses with Top-Chord Loads Between Joints	p. 358
Problems	p. 363
Simple Connections	p. 377
Introduction	p. 377
Bolted Shear Connections: Failure Modes	p. 380
Bearing Strength, Spacing, and Edge-Distance Requirements	p. 382
Shear Strength	p. 388
Installation of High-Strength Bolts	p. 394
Slip-Critical and Bearing-Type Connections	p. 396
Design Examples	p. 402
High-Strength Bolts in Tension	p. 416
Combined Shear and Tension in Fasteners	p. 428
Welded Connections	p. 441
Fillet Welds 443 Problems	p. 461
Eccentric Connections	p. 477
Examples of Eccentric Connections	p. 477
Eccentric Bolted Connections: Shear Only	p. 478
Eccentric Bolted Connections: Shear Plus Tension	p. 491
Eccentric Welded Connections: Shear Only	p. 496
Eccentric Welded Connections: Shear Plus Tension	p. 511
Moment-Resisting Connections	p. 519
Column Stiffeners and Other Reinforcement	p. 536
End Plate Connections	p. 558
Concluding Remarks	p. 572
Problems	p. 572
Composite Construction	p. 593
Introduction	p. 593
Shored versus Unshored Construction	p. 604
Effective Flange Width	p. 606
Steel Headed Stud Anchors	p. 610
Design	p. 613
Deflections	p. 620
Composite Beams with Formed Steel Deck	p. 624
Tables for Composite Beam Analysis and Design	p. 636
Continuous Beams	p. 644
Composite Columns	p. 645
Problems	p. 655
Plate Girders	p. 665
Introduction	p. 665
General Considerations	p. 667
AISC Requirements for Proportions of Plate Girders	p. 670
Flexural Strength	p. 672
Shear Strength	p. 675
Bearing Stiffeners	p. 680
Design 695 Problems	p. 713
Appendix Plastic Analysis and Design	p. 718
Introduction	p. 718
AISC Requirements	p. 720
Analysis	p. 721
Design	p. 726
Concluding Remarks	p. 729
References	p. 730
Answers to Selected Problems	p. 735
Index	p. 739
Table of Contents provided by Ingram. All Rights Reserved.

RENT TEXTBOOKS

Steel Design

Why Rent from Knetbooks?

Top 5 reasons to order all your textbooks from Knetbooks:

Related Products