9780470938270

Inherently safer plants begin with the initial design. Here is where integrity and reliability can be built in at the lowest cost, and with maximum effectiveness. This book focuses on process safety issues in the design of chemical, petrochemical, and hydrocarbon processing facilities. It discusses how to select designs that can prevent or mitigate the release of flammable or toxic materials, which could lead to a fire, explosion, or environmental damage. All engineers on the design team, the process hazard analysis team, and those who make basic decisions on plant design, will benefit from its comprehensive coverage, its organization, and the extensive references to literature, codes, and standards that accompany each chapter.

List of Tables.

List of Figures.

Preface.

Glossary.

Acronyms and Abbreviations.

1. INTRODUCTION.

1.1 Objectives.

1.2 Scope.

1.3 Applicability.

1.4 Organization of This Book.

1.5 References.

2. INHERRENTLY SAFER PLANTS.

2.1 Introduction.

2.2 Intensification.

2.3 Substitution.

2.4 Attenuation.

2.5 Limitation of Effects.

2.6 Simplification and Error Tolerance.

2.7 Inherent Safety Checklist.

2.8 Summary—A Fable.

Appendix 2A. Inherent Process Safety Checklist.

2.9 References.

3. PLANT DESIGN.

3.1 Process Safety Review Through the Life of the Plant.

3.2 Process Design.

3.3 Site Selection and Evaluation.

3.4 Plant Layout and Plot Plan.

3.5 Civil Engineering Design.

3.6 Structural Engineering Design.

3.7 Architectural Design.

3.8 Plant Utilities.

3.9 Plant Modifications.

3.10 References.

4. EQUIPMENT DESIGN.

4.1 Introduction.

4.2 Loading and Unloading Facilities.

4.3 Material Storage.

4.4 Process Equipment.

4.5 References.

5. MATERIALS SELECTION.

5.1 Introduction.

5.2 Corrosion.

5.3 Design Considerations.

5.4 Fabrication and Installation.

5.5 Corrosion Monitoring and Control Techniques.

5.6 References.

6. PIPING SYSTEMS.

6.1 Introduction.

6.2 Detailed Specification.

6.3 Specifying Valves to Increase Process Safety.

6.4 Joints and Flanges.

6.5 Support and Flexibility.

6.6 Vibration.

6.7 Special Cases.

Appendix 6A. Examples of Safety Design Concerns.

6.8 References.

7. HEAT TRANSFER FLUID SYSTEMS.

7.1 Introduction.

7.2 General Description of Heat Transfer Fluids.

7.3 System Design Considerations.

7.4 Heat Transfer Fluid System Components.

7.5 Safety Issues.

7.6 References.

8.THERMAL INSULATION.

8.1 Properties of Thermal Insulation.

8.2 Selection of Insulation System Materials.

8.3 Corrosion under Wet Thermal Insulation.

8.4 References.

9. PROCESS MONITORING AND CONTROL.

9.1 Introduction.

9.2 Instrumentation.

9.3 Process Monitoring Using Computer-Based Systems.

9.4 Alarm Systems Philosophy.

9.5 Safety System Maintenance Testing.

9.6 Implementing the Process Control System.

9.7 Summary.

Appendix 9A. Safety Considerations for Monitoring and Control.

Appendix 9B. Instrumentation and Control Checklist.

9.8 References.

10. DOCUMENTATION.

10.1 Design.

10.2 Operations.

10.3 Maintenance.

10.4 Records Management.

Appendix 10A. Typical Inspection Points and Procedures.

10.5 References.

11. SOURCES OF IGNITION.

11.1 Introduction.

11.2 Types of Ignition Source.

11.3 Ignition by Flames.

11.4 Spontaneous Ignition (Autoignition).

11.5 Electrical Sources.

11.6 Physical Sources.

11.7 Chemical Reactions.

11.8 Design Alternatives.

11.9 References.

12. ELECTRICAL SYSTEM HAZARDS.

12.1 Electrical Equipment Hazards.

12.2 Lightning Protection.

12.3 Bonding and Grounding.

12.4 References.

13. DEFLAGRATION AND DETONATION FLAME ARRESTERS.

13.1 Definitions and Explanations of Terms.

13.2 Introduction.

13.3 Types of Flame Arresters.

13.4 Regulatory Use, Testing and Certification.

13.5 Application Considerations.

13.6 Special Applications and Alternatives.

13.7 Conclusions.

13.8 Future Developments.

13.9 References.

14. PRESSURE RELIEF SYSTEMS.

14.1 Introduction.

14.2 Relief Design Scenarios.

14.3 Pressure Relief Devices.

14.4 Sizing of Pressure Relief System.

14.5 Design of Relief Devices: Other Considerations.

14.6 DIERS Methods of Overpressure Protection for Two-Phase Flows.

14.7 Emergency Depressuring.

14.8 References.

15. EFFLUENT DISPOSAL SYSTEMS.

15.1 Flare Systems.

15.2 Blowdown Systems.

15.3 Incineration Systems.

15.4 Vapor Control Systems.

15.5 References.

16. FIRE PROTECTION.

16.1 Introduction.

16.2 Detection and Alarm Systems.

16.3 Water-Based Fire Protection Systems.

16.4 Chemical and Special Agent Extinguishing Systems.

16.5 Passive Fire Protection.

16.6 References.

17. EXPLOSION PROTECTION.

17.1 Introduction.

17.2 Energy Release on Noncombusive Vessel Rupture.

17.3 Flammability.

17.4 Flame Events.

17.5 Flammability Control Measures Inside Equipment.

17.6 Flame Mitigation Inside Equipment.

17.7 References.

Index.

What is included with this book?

The New copy of this book will include any supplemental materials advertised. Please check the title of the book to determine if it should include any access cards, study guides, lab manuals, CDs, etc.

The Used, Rental and eBook copies of this book are not guaranteed to include any supplemental materials. Typically, only the book itself is included. This is true even if the title states it includes any access cards, study guides, lab manuals, CDs, etc.

Amazon no longer offers textbook rentals. We do!

Guidelines for Engineering Design for Process Safety

Guidelines for Engineering Design for Process Safety

0470938277

Summary

Table of Contents

Supplemental Materials

Write a Review